Autotrol Basic Automatic Water Softener

Excessive hardness in water due to high levels of calcium carbonate will cause scale buildup on pipes and particularly water heating elements. Also there will be difficulty getting soap and detergents to lather. All these problems can be eliminated efficiently and automatically using an Autotrol Water Softener. These utilise the ion exchange process where the calcium is replaced with the more soluble sodium. This is all done automatically using a timer control which allows the water softener resin bed to backwash and regenerate with a brine solution as required.

The Autotrol range of water softeners is our basic range which covers a flow rate from 30 to 150 Litres per minute.  Each softener is supplied complete with all components including control head in either timer or capacity based control of regenerations, FRP softener vessel, brine tank, brine suction and refill, transformer and connection manifold.  Systems can also be supplied as Duplex.  These systems need site installation and commissioning.  

Benefits
  • Easy to use controller
  • Softening to < 0.5 ppm with full brining
  • Continuous soft water supply
Applications
  • Suitable for both commercial and industrial applications
  • Ideal for low soft water consumption

Specifications

Controller: Pentair 
Operating pressure: 3 – 8 bar
Operating temperature: 5 – 35 °C
Conditions of use: The unit may only be used for softening feed water of drinking water quality or appropriately pre-treated well or surface water. The following parameters must be maintained in the feed water:
Free chlorine:
 		not detectable
Iron < 0.2 mg/l
Manganese:
 		< 0.05 mg/l
WPRO
Get a Quote Now

Need more information? Flick us a message.

WPRO

Autotrol Basic Automatic Water Softener

Excessive hardness in water due to high levels of calcium carbonate will cause scale buildup on pipes and particularly water heating elements. Also there will be difficulty getting soap and detergents to lather. All these problems can be eliminated efficiently and automatically using an Autotrol Water Softener. These utilise the ion exchange process where the calcium is replaced with the more soluble sodium. This is all done automatically using a timer control which allows the water softener resin bed to backwash and regenerate with a brine solution as required.

The Autotrol range of water softeners is our basic range which covers a flow rate from 30 to 150 Litres per minute.  Each softener is supplied complete with all components including control head in either timer or capacity based control of regenerations, FRP softener vessel, brine tank, brine suction and refill, transformer and connection manifold.  Systems can also be supplied as Duplex.  These systems need site installation and commissioning.  

Benefits
  • Easy to use controller
  • Softening to < 0.5 ppm with full brining
  • Continuous soft water supply
Applications
  • Suitable for both commercial and industrial applications
  • Ideal for low soft water consumption

Specifications

Controller: Pentair 
Operating pressure: 3 – 8 bar
Operating temperature: 5 – 35 °C
Conditions of use: The unit may only be used for softening feed water of drinking water quality or appropriately pre-treated well or surface water. The following parameters must be maintained in the feed water:
Free chlorine:
 		not detectable
Iron < 0.2 mg/l
Manganese:
 		< 0.05 mg/l
View product
Back to top