ECOTROL-D HF Duplex Water Softeners

The ECOTROL-D HF duplex softener is used for automatic and continuous water softening in industrial applications. It is equipped with one Clack main control valve per pressure tank, one brine tank and monodisperse quality exchanger resin. The industrial controller ICI provides an integrated Modbus RTU interface. The regeneration is time or quantity controlled, optionally a quality controlled operation is possible by combination with an online measurement of the water hardness.

Benefits

• High-quality controller in industry standard
• Softening to < 0.1 ppm with full brining
• Continuous soft water supply
• High operational safety due to robust, independent central control valves (operation in single mode possible in case of failure)
• Modbus RTU interface already integrated

Applications

• For continuous soft water supply at high flow rates
• With online hardness measurement suitable for fluctuating raw water quality and particularly safe against hardness breakthrough
• Due to integrated Modbus RTU interface ideal for industrial applications

Specifications

Controller:	Clack
Operating pressure:	3 – 8 bar
Operating temperature:	5 – 35 °C
Conditions of use:	The unit may only be used for softening feed water of drinking water quality or appropriately pre-treated well or surface water. The following parameters must be maintained in the feed water:
Free chlorine:	not detectable
Iron	< 0.2 mg/l
Manganese:	< 0.05 mg/l