ECOTROL-P Duplex Water Softeners

Shipping calculated at checkout.

From 5m to 53 m3/hour, the Sensotrol range has a softener to suit most applications.  Being Duplex, continuous soft water can be guaranteed.  These systems are high quality designed and pre fabricated to ensure a high quality installation and long life. 

CHARACTERISTICS

  • Sensor-controlled alternating water softening units
  • Permanent soft water supply, sensor-controlled regeneration and automatic alternation to the other vessel upon depletion of the ion exchange resin
  • High operational safety thanks to monitoring of the operating conditions, regeneration and brine formation
  • Sophisticated SENSOTROL controller with Profinet option and optional process visualisation
  • Monodisperse quality exchange resin
  • From size 400 on resin in bags for on-site filling

ADVANTAGES

  • Lower water and salt consumption thanks to the optimisation of resin capacity
  • Particularly suitable and economical if raw water hardness fluctuates
  • Relevant operating parameters are logged
  • Many freely programmable inputs/outputs for additional options
  • High-quality brine tank with salt shortage switch

OPTIONS

  • Pipework assembled, mounted, fixed into position, stainless steel skid
  • Backflow preventer, fine filter, blending valves
  • Hardness monitoring
  • Recirculation pumps

SPECIFICATIONS

Controller: Clack 
Operating pressure: 3 – 8 bar
Operating temperature: 5 – 35 °C
Conditions of use: The unit may only be used for softening feed water of drinking water quality or appropriately pre-treated well or surface water. The following parameters must be maintained in the feed water:
Free chlorine:
not detectable
Iron < 0.2 mg/l
Manganese:
< 0.05 mg/l


    Need more information? Flick us a message.

    WPRO

    ECOTROL-P Duplex Water Softeners

    From 5m to 53 m3/hour, the Sensotrol range has a softener to suit most applications.  Being Duplex, continuous soft water can be guaranteed.  These systems are high quality designed and pre fabricated to ensure a high quality installation and long life. 

    CHARACTERISTICS

    ADVANTAGES

    OPTIONS

    SPECIFICATIONS

    Controller: Clack 
    Operating pressure: 3 – 8 bar
    Operating temperature: 5 – 35 °C
    Conditions of use: The unit may only be used for softening feed water of drinking water quality or appropriately pre-treated well or surface water. The following parameters must be maintained in the feed water:
    Free chlorine:
    not detectable
    Iron < 0.2 mg/l
    Manganese:
    < 0.05 mg/l


    View product