ECOTROL-D Duplex Water Softeners

Shipping calculated at checkout.

The ECOTROL-D range of duplex softeners are used for automatic and continuous water softening in industrial applications. It is equipped with one Clack main control valve per pressure tank, one brine tank and monodisperse quality exchanger resin. Regeneration is time or volume controlled.

Benefits
  • Easy to use controller
  • Softening to < 0.5 ppm with full brining
  • Continuous soft water supply
  • High operational safety due to independent central control valves (operation in single mode possible in case of failure)
Applications
  • For applications that require a continuous soft water supply and high operational reliability
  • Typically used as pre-treatment before reverse osmosis system
Specifications

Controller: Clack 
Operating pressure: 3 – 8 bar
Operating temperature: 5 – 35 °C
Conditions of use: The unit may only be used for softening feed water of drinking water quality or appropriately pre-treated well or surface water. The following parameters must be maintained in the feed water:
Free chlorine:
not detectable
Iron < 0.2 mg/l
Manganese:
< 0.05 mg/l

Need more information? Flick us a message.

WPRO

ECOTROL-D Duplex Water Softeners

The ECOTROL-D range of duplex softeners are used for automatic and continuous water softening in industrial applications. It is equipped with one Clack main control valve per pressure tank, one brine tank and monodisperse quality exchanger resin. Regeneration is time or volume controlled.

Benefits
Applications
Specifications

Controller: Clack 
Operating pressure: 3 – 8 bar
Operating temperature: 5 – 35 °C
Conditions of use: The unit may only be used for softening feed water of drinking water quality or appropriately pre-treated well or surface water. The following parameters must be maintained in the feed water:
Free chlorine:
not detectable
Iron < 0.2 mg/l
Manganese:
< 0.05 mg/l
View product