EASYPRO SMART Complete Aquatics Controller

The EASYPRO SMART range is a popular choice for customers who like things simple.  Install, set and forget.  The EASYPRO SMART system measures and controls a range of aquatic application water parameters. 

Select the model that suits your requirements.  Parameters measured differ by model but include FAC, ORP, pH, temperature and Conductivity. 

Each EASYPRO SMART comes with two integrated dose pumps mounted on the back board which complete the picture.  

Built using quality materials and components you can expect a long life and ease of use thanks to the touch screen interface.  Operational costs are also low thanks to the use of quality sensors.  

The EASYPRO SMART range is available in three simple pre-configured versions, the water sampling station comes almost ready-to-use.

Models:

• EASYPRO SMART RP - Measure & Control pH & ORP with temperature measure
• EASYPRO SMART CP - Measure & Control pH & FAC with temperature measure
• EASYPRO SMART CPL - Measure & Control pH, FAC & Conductivity + temperature measure

Features: 

• Measurement and control of ORP (0 – 1000mV) - RP Model.
• Measurement and control of ORP (0 – 1000mV) - RP Model.
• Measurement and control of the pH value (pH 2 – 12) - All Models.
• Measurement and control of FAC (0-15 mg/L) - CP & CPL Models.
• Measurement and control of conductivity (0 – 20 mS/cm) - CPL Model.
• Measurement of the temperature (5 – 45 °C) - All Models.
• Output Modules:  3 x relay*1 x optocoupler - All Models.
• Touch screen interface gives a ‘ipad like’ interface
• Web server and Modbus protocol via Ethernet - All Models.
• 2 x 2.8 L/H peristaltic dose pumps 1.5 Bar max. back pressure - All Models.
• Backboard mounted with all components to undertake installation - All Models.

Installation Considerations:

Pools up to 300m3 @ dosing 1.5 ppm per hour (12.5% hypo) with no secondary disinfection.

Pools up to 500m3 @ dosing 0.5 ppm per hour (12.5% hypo) with secondary disinfection.

Note: limits may need adjustment according to site conditions including, but limited to; use of stabiliser, bather load, indoor/outdoor applications, temperature etc.

Need installation?  WaterPro can arrange installation, commissioning and training using one of our qualified and approved installers. Contact our team to arrange a consultation and quotation.